Table of Contents
Advertisement
56
5.
To ensure the sewing material is guided more smoothly, you
can adjust the height of a pressure piece (5) attached to the
guide (6) by loosening the fastening screw (4).
Important
While the cutting mechanism does not require any special main-
tenance, you should drip a few drops of lubricant into the felt
lubricator (1) or into the corresponding lubricator on the holder (2)
in order to ensure that the mechanism will keep working properly.
Fig. 34: Lubricating the cutting mechanism
(1) - Felt lubricator
(2) - Lubricator on the holder
Operating Instructions D887 e-con - 00.0 - 11/2023
Operation
①
②
Advertisement
Table of Contents
