Dürkopp Adler D887 e-con Operating Instructions Manual page 115

Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023
Options for setting the Needle thread tension parameter
Menu item Setting 1
Linear Needle thread tension
Value range
absolute
00 – 99
Min. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Max. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Linear Offset
Value range
with
-99 – 99
offset
Min.
Sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Max.
Sewing speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2. Value On/Off Min. Speed
Value range
0000-4000 [rpm]
(depending on subclass)
2. Value On Min. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Setting 2
Maximum needle thread
tension reached at the
upper speed limit.
Speed at which the
increase in needle thread
tension should start.
Speed up to which the
increase in needle thread
tension should occur.
Difference up to maximum
needle thread tension
reached at the upper speed
limit.
Speed at which the
increase in needle thread
tension should start.
Speed up to which the
increase in needle thread
tension should occur.
Speed from which the
second needle thread
tension should be used.
Speed from which the
second needle thread
tension should be used.
113