Dürkopp Adler D887 e-con Operating Instructions Manual page 139

Programming Commander DELTA
Icon Parameter
Sewing foot pressure
Max. sewing speed
Correction speed effect
Correction speed effect
Stitch length
Needle thread tension
Sewing foot pressure
Function modules
Function modules 1-8
Operating Instructions D887 e-con - 00.0 - 11/2023
Settings
The sewing foot pressure can be
adjusted at different material
thicknesses by the software.
The maximum sewing speed can be
adjusted to different material
thicknesses by the software.
Value range
On/Off
( p. 146)
The stitch length changes slightly
depending on the speed. For this
reason, the stitch length can be
adjusted at different speeds by the
software.
Depending on the speed, the needle
thread tension can be adjusted at
different speeds by the software.
Depending on the speed, the sewing
foot pressure can be adjusted at
different speeds by the software.
( p. 115)
137