Dürkopp Adler D887 e-con Operating Instructions Manual page 149

Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023
Setting options Stitch length
Menu item Setting 1
Linear Stitch length
Value range
with
-50 – 50 [%]
offset
Min. Speed
Value range
0000-4000 [rpm]
(depending on subclass)
Max. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2. Value Min. Speed
Value range
On/Off
0000 – 4000 [rpm]
(depending on subclass)
2. Value Min. Speed
Value range
On
0000 – 4000 [rpm]
(depending on subclass)
Setting 2
Maximum stitch length
variation reached at the
upper speed limit.
Speed at which the
increase/reduction of stitch
length should start.
Speed up to which the
increase/reduction of stitch
length should occur.
Speed from which the
nd
2 stitch length should be
used.
Speed from which the
nd
2 stitch length should be
used.
147