Programming Commander DELTA
Icon
Parameter
Correction speed effect
Correction speed effect
Stitch length
Needle thread tension
Sewing foot pressure
Function modules
Function modules 1-8
Output
Segment Output 01–16
Operating Instructions D887 e-con - 00.0 - 11/2023
Settings
Value range
On/Off
( p. 111)
The stitch length changes slightly
depending on the speed. For this
reason, the stitch length can be
adjusted at different speeds by the
software.
Depending on the speed, the nee-
dle thread tension can be adjusted
at different speeds by the software.
Depending on the speed, the sew-
ing foot pressure can be adjusted
at different speeds by the software.
( p. 115)
( p. 115)
103