Table of Contents
Advertisement
192
Fig. 103: Changing the handwheel
(1) - Large handwheel
(2) - Hole
(3) - Screws
(4) - Pin
To change the handwheel:
1.
Loosen the screws (3).
2.
Remove the large handwheel (1).
3.
Position the small handwheel (5) at the pulley in such a way
that the pin (4) protruding on the inside of the handwheel fits
into the matching hole (2) in the pulley.
4.
Tighten the small handwheel (5) using the screws (3).
5.
Place the cover (6) and tighten it using the screws (7).
The handwheel has been changed.
①
②
③
④
⑤
⑥
⑦
(5) - Small handwheel
(6) - Cover
(7) - Screws
Operating Instructions D887 e-con - 00.0 - 11/2023
Setup
Advertisement
Table of Contents
