Setting The Parameters - Dürkopp Adler D887 e-con Operating Instructions Manual

98
Fig. 70: Status bar configuration (5)
3. Press and hold the desired symbol and drag it to move it into
or out of the status bar.
4. Press to return to Settings or
Default status bar settings
Fig. 71: Default status bar
Material thickness
Seam Length
Stitch count
5.7.2

Setting the parameters

In Manual mode, you can set a variety of parameters. The functions
and how they affect the parameters are described further below.
To access the parameter settings:
1. Press the symbol
 This opens the parameter settings interface.
Programming Commander DELTA
Revolution Speed
Current
to bring up the parameter pane.
Operating Instructions D887 e-con - 00.0 - 11/2023
to return to Manual mode.
Spare
Position Handwheel