Authorizations As Default Technician - Dürkopp Adler D887 e-con Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023
Fig. 60: User Management (4)
5. Define the desired settings (for explanations,  p. 83).
6. Press to return to Settings or
5.4.2

Authorizations as Default Technician

The factory setting for the Default Technician requires that the tech-
nician enter their username and password (technician, 25483) to log
in. If selecting User Management as a Default Technician ( p. 80),
you will be presented with the following interface:
Fig. 61: Authorizations as Default Technician
①
(1) - Tab for roles and users
(2) - List of roles/users
On the left-hand side, you can select between the tabs (1) reserved
for roles ( p. 84) and users ( p. 88). Detailed explanations
are provided further below. To the right of the tabs you will find
to return to Manual mode.
②
(3) - Specify roles/users
③
83