For One-Needle Machines - Dürkopp Adler D887 e-con Operating Instructions Manual

26
4.5.1

For one-needle machines

Fig. 6: Threading the needle thread (one-needle machine) (1)
①
(1) - Tube
To thread the needle thread:
1. Fit the thread reel on the reel stand.
The unwinding bracket must stand directly above the thread
reel.
2. Feed the thread from the rear to the front through the thread
guide on the unwinding bracket (2).
3. Insert the thread from the top and guide it through the tube (1).
(2) - Thread guide on the unwinding
bracket
Operating Instructions D887 e-con - 00.0 - 11/2023
Operation
②