Table of Contents
Advertisement
68
5.5
Software operating modes
The software of the control panel offers various operating modes:
• Manual mode
Manual mode is the simplest operating mode. There are no
programs/seam programs and no inputs for individual seam
sections.
Changes to the sewing foot pressure, stroke height, stitch
length, needle thread tension and, also, the activation of
other functions are always implemented immediately.
All the major sewing parameters can be changed manually
during the sewing process.
• Automatic mode
Automatic mode allows for the execution of setups (seam
program comprised of only one seam section) or complex
seam programs (comprising 2 or more seam sections).
Seam programs are divided into individual seam sections.
Each section is assigned its own individual stitch length,
needle thread tension, etc.
• Programming
Programming mode makes it possible to create, adjust or
delete a seam program in a quick and easy manner.
The individual modes and their uses are explained in detail later on.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Programming
Advertisement
Table of Contents
