Possible Errors While Assembling The Locking Mechanism - Dürkopp Adler D887 e-con Operating Instructions Manual

Setup
Operating Instructions D887 e-con - 00.0 - 11/2023
7.9.1 Possible errors while assembling the locking
mechanism
While the machine is being erected, the locking mechanism
collides with the shaft (possibly bending it), as e.g.
• the oil pan was not assembled correctly in the slot:
Fig. 99: Possible errors while assembling the locking mechanism (1)
• the locking mechanism does not have enough play:
Fig. 100: Possible errors while assembling the locking mechanism (2)
189