Dürkopp Adler D887 e-con Operating Instructions Manual page 229

Troubleshooting
Code Type
4911 Information Not in translation table
4918 Warning
4919 Warning
4920 Warning
4921 Warning
4922 Error
4923 Error
4924 Warning
4925 Warning
4926 Warning
4930 Information Control replaced
4931 Information Checksum failure of control
6070 Error
6353 Error
6360 Information No valid data on external
6361 Information No external EEprom con-
Operating Instructions D887 e-con - 00.0 - 11/2023
Possible cause
Invalid update file
Reset failed
Update protocol failure
Update was interrupted
No User Database found
Sync failed
Update Control Unit Software • The control is not responding.
Sync failed
Sync failed
Internal CAN
EEprom Timeout
EEprom (internal data struc-
tures are not compatible with
the external data storage
device)
nected
Corrective
• Reset necessary
• Contact DA Service
• Contact DA Service
• Contact DA Service
• Contact DA Service
• Contact DA Service
• Contact DA Service
• Do you wish to update the control
software?
• Contact DA Service
• Contact DA Service
• Data from operation panel will be stored
to control
• Data from operation panel will be stored
to control
• Perform software update
• Replace the control
• Switch off the control, wait until the LEDs
are off, check connection for machine ID,
and switch on control again
• Software update
• Connect machine ID
227