126
Fig. 76: Sewing in Automatic mode
①
②
(1) - Progress in the segment
Possible actions in the course of the seam
The following table lists the functions that can be performed in
the course of the seam.
Button/Pedal
Push the pedal
halfway back
Push the pedal
fully back
Programming Commander DELTA
(2) - Progress in the program
Function
•
Skip to previous/next segment.
•
Lift sewing foot.
• Cut off or cancel the program.
The program remains stopped at the cutoff point.
•
An alternative option is to activate the parameter
segment switch by pedal in the program defaults.
The segment switch will then occur when the
pedal is pressed fully back.
• Visible as soon as the sewing process starts.
• Start repair mode. Repair mode can be set in the
program defaults.
•
Cancel a seam program by pressing again.
Operating Instructions D887 e-con - 00.0 - 11/2023