Connecting The Sewing Light Transformer; Pneumatic Connection (Optional) - Dürkopp Adler D887 e-con Operating Instructions Manual

202

7.15.3 Connecting the sewing light transformer

Fig. 112: Connecting the sewing light transformer
①
(1) - Sewing light transformer
To connect the sewing light transformer:
1. Switch off the machine.
2. Screw the sewing light transformer (1) in place next to
the control (2) under the tabletop.
Connect the sewing light transformer (1) as specified in the wiring

diagram ( Service Instructions).

7.16 Pneumatic connection (optional)

NOTICE
Property damage from oily compressed air!
Oil particles in the compressed air can cause malfunctions of
the machine and soil the sewing material.
Ensure that no oil particles enter the compressed air supply.
(2) - Control
Operating Instructions D887 e-con - 00.0 - 11/2023
Setup
②