Dürkopp Adler D887 e-con Operating Instructions Manual page 98

96
Special tiles
Most tiles act as supplements to the function that can be accessed
via the program parameters and the programing menu. Some
functions, however, can only be managed or activated via a tile.
Icon Meaning
Energy saving mode
A press of this tile lets you set the control panel to energy
saving mode.
To exit energy saving mode again, press the pedal back.
A long press of this tile lets you set a delay after which
the energy saving mode will be activated automatically.
A video still start playing after this time has elapsed.
Once the video has finished, the machine will be in
energy saving mode.
Screen lock
A press of this tile lets you lock the control panel
against inadvertent taps.
A long press on the grayed-out tile disables the screen
lock again.
PDF viewer
Shows a stored PDF file.
Limit Control of the thread tension
You can activate/deactivate the function with a press of
the tile.
A long press brings up the setting options of the TTLC
system. The limits are shown as values.
Limit Control of the thread tension speedometer widget
You can activate/deactivate the function with a press of
the tile.
A long press brings up the setting options of the TTLC
system. The limits are shown graphically.
Limit Control of the thread tension - time view widget
The tile shows whether the last 30 stitches were within
or above the limits. An additional statistic can be viewed
under Information( p. 91)
Programming Commander DELTA
Operating Instructions D887 e-con - 00.0 - 11/2023