Mechanical Installation; Items Supplied; Split Shipment; Tools Needed - Danfoss D9h Operating Manual

VLT® AutomationDrive FC 302
Operating Guide

4 Mechanical Installation

4.1 Items Supplied

Items supplied can vary according to product configuration.
• Make sure that the items supplied and the information on the nameplate correspond to the order confirmation.
• Visually check the packaging and the drive for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarification.
1
2
3
4
5
6
Illustration 12: Example of a Product Nameplate for E6h Enclosure (IEC Version on Left, UL Version on Right)
1 Type code
2 Part number and serial number
3 Power rating
WARRANTY
Removing the nameplate from the drive results in loss of warranty.

4.2 Split Shipment

Depending on the options ordered with an enclosed drive, the drive can consist of 5 cabinets and measure 3400 mm (134 in) in
width, which can be difficult to transport and handle. In cases where an enclosed drive exceeds 1800 mm (71 in) in width, the cabi-
nets are separated and shipped in multiple boxes. All necessary fasteners needed for reassembly are provided in the delivery. To
reassemble a split shipment, refer to

4.3 Tools Needed

• I-beam and hooks rated to lift the weight of the drive.
• Crane or other lifting aid to place the unit into position.
• Drill with a 12 mm (1/2 in) drill bit.
Danfoss A/S © 2021.10
N O T I C E
4.11 Installing the Enclosed Drive
4 Input voltage, frequency, and current
5 Output voltage, frequency, and current
6 Discharge time
and 5.6.1 Connecting Wiring
AQ262139143212en-000301 / 130R0879 | 39
Mechanical Installation
Harnesses.