Finding The Declaration Of Conformity Certificate - Danfoss D9h Operating Manual

VLT® AutomationDrive FC 302
Operating Guide
Thermal memory retention requirement
The enclosed drive is UL listed per UL508A and CSA 14 standards. The drive module in the enclosed drive system complies with UL
508C or UL 61800-5-1 thermal memory retention requirements. For more information on UL 508C thermal memory retention re-
quirements, refer to the Motor Thermal Protection section in the product-specific Design Guide.
OUTPUT FREQUENCY LIMIT
Due to export control regulations, the output frequency of the enclosed drive (with no output filters) is limited to 590 Hz. For
demands exceeding 590 Hz, contact Danfoss. For enclosed drives with output filters, the maximum output frequency is limited to
60 Hz without derating and to 100/120 Hz with derating.
ADN-compliance
For more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by In-
land Waterways (ADN), refer to section ADN-compliant Installation in the product-specific Design Guide.

1.5 Finding the Declaration of Conformity Certificate

1.
Open a web browser and enter https://www.danfoss.com/en/service-and-support/documentation/.
2.
Click Certificates & declarations.
3.
Use the Search field to search for PLV*.
The system provides a list of the search results.
4. Filter the search results be entering the following criteria.
a. Business unit = Drives
b.
Documents/Document types = Certificate
5.
Scroll down until you find the PLV XXX titled certificate for the specific product segment, such as PLV 302 EU Declaration.
Double click the link to the open the certificate. For an example, see
Danfoss A/S © 2021.10
N O T I C E
1.6 Declaration of Conformity
Introduction
Certificate.
AQ262139143212en-000301 / 130R0879 | 9