Table of Contents
Advertisement
User Guide
EC-C1700B-420
Installation
Mechanical installation
32 |
©
Danfoss | June 2023
Auxiliary circuit measurement
Allowed mounting position
Do not place the electric device on the ground without proper mounting or protective
structure.
The electric device must be mounted in a way that no other object or structure, which can
cause compression, pull, torsion, rotation etc., touches the enclosure of the electric device. In
addition, the electric device should not be used to support any other structure of the system.
•
The electric device must be mounted on a flat, heat- and flame-resistant mounting place (for example
on a bracket).
•
The electric device can be mounted in any direction. Mount the electric device permanently
from the mounting points.
•
To fulfill the mechanical and environmental standards, for example vibration and shock, it is
recommended to mount the electric device from the bottom side, with at least 6 pcs of M8 screws.
•
Mounting points are shown in the Figure below.
BC454142332191en-000101
Advertisement
Table of Contents
