Disposal Instruction; Mechanical Installation - Danfoss VLT 2811 Quick Manual

1 Quick Guide
1
VLT 2800 Operating Instructions
VLT 2800 Design Guide
VLT 2800 Data Sheet
Mounting Instruction for VLT 2800
VLT 2800 Filter Instruction
Precise Stop
Cold Plate
VLT 2800 NEMA 1 Terminal Covering
VLT 2800 DeviceNet Cable
VLT 2800 Blue Star Condensing Unit
VLT 2880 - 2882 Spare Part Instruction
Wobble Function
VLT 2800 LCP Remote-mounting Kit
User Instruction for LOP
Brake Resistor
Profibus DP Manual
VLT 2800 DeviceNet Manual
Metasys N2 Manual
Profibus Manual
Output Filter Manual
Brake Resistor Manual
MCT-10 Manual
Modbus RTU Manual
Protection against Electrical Hazards
X = Revision Number, Y = Language code
Application notes can be found on
umentations/Technical+Documentation.htm
1.2.3 Approvals

1.2.4 Disposal Instruction

1.3 Mechanical Installation

VLT 2800 frequency converters allow side-by-side installation on a wall in any position as the units
do not require ventilation on the side. Because of the need for cooling, there must be 10 cm free
air passage above and below the frequency converter.
All units with enclosure IP 20 must be integrated in cabinets and panels. IP 20 is not suitable for
remote mounting. In some countries, e.g. in the USA, units with enclosure NEMA 1 are approved
for remote mounting.
4
Title
http://www.danfoss.com/BusinessAreas/DrivesSolutions/Doc-
Equipment containing electrical components must not be disposed of
together with domestic waste.
It must be separately collected with electrical and electronic waste
according to local and currently valid legislation.
MG.28.M1.02 - VLT ® is a registered Danfoss trademark
VLT 2800 Quick Guide
Literature no.
MG.27.AX.YY
MG.27.EX.YY
MD.27.AX.YY
MI.28.AX.YY
MI.28.BX.YY
MI.28.CX.YY
MI.28.DX.YY
MI.28.EX.YY
MI.28.FX.YY
MI.28.GX.YY
MI.28.HX.YY
MI.28.JX.YY
MI.56.AX.YY
MI.90.EX.YY
MI.90.FX.YY
MG.90.AX.YY
MG.90.BX.YY
MG.90.CX.YY
MG.90.EX.YY
MG.90.NX.YY
MG.90.OX.YY
MG.10.RX.YY
MG.10.SX.YY
MN.90.GX.YY