Danfoss D9h Operating Manual page 16

VLT® AutomationDrive FC 302
Operating Guide
LEAKAGE CURRENT HAZARD
Leakage currents exceed 3.5 mA. Failure to ground the drive properly can result in death or serious injury.
-
Ensure the correct grounding of the equipment by a certified electrical installer.
ROTATING SHAFTS
Contact with rotating shafts and electrical equipment can result in death or serious injury.
-
Ensure that only trained and qualified personnel perform installation, start-up, and maintenance.
-
Ensure that electrical work conforms to national and local electrical codes.
-
Follow the procedures in this guide.
INTERNAL FAILURE HAZARD
An internal failure in the drive can result in serious injury when the drive is not properly closed.
-
Ensure that all safety covers are in place and securely fastened before applying power.
16 | Danfoss A/S © 2021.10
W A R N I N G
W A R N I N G
C A U T I O N
AQ262139143212en-000301 / 130R0879
Safety