Control Compartment Options - Danfoss D9h Operating Manual

VLT® AutomationDrive FC 302
Operating Guide
Option card terminal
X66.14
X58.1
X58.2
Table 55: Option D Terminal Connections
Option card terminal
35
36

5.7.6 Control Compartment Options

5.7.6.1 Auxiliary Supply Terminals
Table 56: Auxiliary Supply Type Codes
Character position
21
The auxiliary supply terminal option provides an external voltage supply to the –XD1.1 terminal. The external supply must be short-
circuit protected. The power of the external supply depends on other selected cabinet options.
-FC6
-XD1.1
2
10 A
Illustration 49: Auxiliary AC Supply Terminals
HIGH VOLTAGE
The mains disconnect switch does not disconnect the external voltage supply. Failure to disconnect the external voltage supply
before touching any components in the control compartment can result in death or serious injury.
-
Disconnect the external voltage supply.
-
Only qualified personnel must install, start up, and maintain the drive.
Danfoss A/S © 2021.10
Corresponding terminal within the control compartment
XDF.14
XDF.15
XDF.16
Corresponding terminal within the control compartment
XD2.28
XD2.29
Code Description
1 230 V AC external
5 230 V AC external + 24 V DC internal
6 120 V AC external
9 120 V AC external + 24 V DC internal
W A R N I N G
-XD1
AQ262139143212en-000301 / 130R0879 | 91
Electrical Installation