Danfoss D9h Operating Manual page 4

VLT® AutomationDrive FC 302
Operating Guide
4.6 Installation Requirements
4.7 Cooling Requirements
4.8 Airflow Rates
4.9 Lifting the Drive
4.10 Combining Multiple Cabinets from a Split Shipment
4.11 Installing the Enclosed Drive
4.11.1 Creating an Entry for Cables
4.11.2 Installing the Drive with Back-channel Cooling Option
4.11.3 Securing the Cabinet(s) to the Floor
5 Electrical Installation
5.1 Safety Instructions
5.2 EMC-compliant Installation
5.3 Wiring Overview for D9h and D10h Enclosed Drives
5.4 Wiring Overview for E5h and E6h Enclosed Drives
5.5 Control Terminal Wiring Diagram Cross-reference
5.6 Split Shipment Wiring Harnesses
5.6.1 Connecting Wiring Harnesses
5.6.2 Cable Routing
5.6.3 D10h Wiring Harness
5.6.4 E5h Wiring Harness
5.6.5 E6h Wiring Harness
5.7 Control Compartment Wiring
5.7.1 Safety Precautions
5.7.2 Control Compartment Interior View
5.7.3 Control Terminals
5.7.4 Relay Terminals
5.7.5 Option Card Terminals
5.7.6 Control Compartment Options
5.8 Connecting Motor, Mains, and Ground Cables
5.8.1 Power Cabling and Grounding Considerations
5.8.2 Connecting to the Mains
5.8.3 Connecting the Drive Module to the Motor
5.8.4 Connecting the Sine-wave Filter to the Motor
5.8.5 Connecting the dU/dt Filter to the Motor
5.8.6 Connecting to Ground
5.9 Installing Upstream Fuses
5.9.1 Upstream Fuse Considerations
4 | Danfoss A/S © 2021.10
Contents
AQ262139143212en-000301/130R0879
41
42
42
44
44
46
46
46
47
49
49
50
53
54
55
56
56
57
65
69
75
81
81
82
83
84
84
91
99
99
100
102
104
105
107
108
108