Safety Regulations; Owner Responsibilities - ABB HVC-PD Installation Manual

Hide thumbs Also See for HVC-PD:
Table of Contents

Advertisement

Pinch Hazard
Identifies a hazard that could result in injuries in which some body parts
are pinched or crushed.
Fall Hazard
Identifies a hazard that could result in injury due unsafe work at height.
Various
Identifies a hazard that could result in damage to the machine, other
equipment, and/or environmental pollution.
Environmental damage
Identifies a special indications as well as biddings and prohibitions to
avoid damages in the environment. This sign refer to present national
regulation according the environment.
Contains remarks, suggestions or advice.

1.4. Safety regulations

1.4.1. Owner responsibilities

The owner and site operator are required:
To operate the charge station with the protective devices installed and to make sure
all protective devices are correctly installed after carrying out installation or
maintenance.
To write an emergency plan that instructs people what to do in case of emergency.
To prepare the site where the charge station will be installed, according to the
requirements described in this guide.
To make sure that there is enough space around the charger to carry out maintenance
work.
To appoint a person responsible for the safe operation of the charge station and for
the coordination of all work.
All works have to be carried out from qualified personnel. All qualified personnel has
to estimate their transmitted works, identify and avoid. They must have experience and
enough knowledge over: safety regulations and labor medical regulations, accident
prevention regulations, guideline and approved safety regulations, and special
instruction concerning occurrence of danger (especially remaining risk) possible
dangers.
Document: v3.1 / Document No.: 6AGA000008-0600-EN | Date: 22-05-2019
HVC-PD E-Bus Charger Installation Guide
WARNING
WARNING
CAUTION
CAUTION
NOTICE
Page 10 of 139

Advertisement

Table of Contents
loading

Table of Contents