Function Scope Of The "Control Totalizer" Parameter; Function Scope Of The "Reset All Totalizers" Parameter - Endress+Hauser Proline Cubemass C 100 Operating Instructions Manual

Operation
Parameter
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
76
Parameter overview with brief description
Prerequisite
A process variable is selected
in the Assign process variable
parameter (→  67) of the
Totalizer 1 to n submenu.
A process variable is selected
in the Assign process variable
parameter (→  67) of the
Totalizer 1 to n submenu.
–
11.6.1

Function scope of the "Control Totalizer" parameter

Options Description
Totalize The totalizer is started or continues running.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
Preset + hold The totaling process is stopped and the totalizer is set to its defined start value
from the Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
Preset + totalize The totalizer is set to the defined start value from the Preset value parameter and
the totaling process is restarted.
11.6.2

Function scope of the "Reset all totalizers" parameter

Options Description
Cancel No action is executed and the user exits the parameter.
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.
Description
Control totalizer value.
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the Unit totalizer
parameter (→  67).
Reset all totalizers to 0 and
start.
Proline Cubemass C 100 Ethernet/IP
Selection / User Factory setting
entry
• Totalize Totalize
• Reset + hold
• Preset + hold
• Reset + totalize
• Preset + totalize
Signed floating-point Country-specific:
number • 0 kg
• 0 lb
• Cancel Cancel
• Reset + totalize
Endress+Hauser