Table of Contents
Advertisement
Figure 4-1
4.2
Requirements when mounting and installing the device
4.2.1
Requirements for installation location
The cabinet units are suitable for installation in general operating areas (to
DIN EN 60146-1-1 / VDE 558 T11 and DIN EN 50178 / VDE 0160 (IEC 62103), degree of
contamination 2; without conducted contamination). For this reason, SINAMICS devices must
be protected in such a way that they cannot be touched directly when they are being installed
in general operating areas.
The operating areas must be dry and free of dust. The air supplied must not contain any
electrically conductive gas, vapors, or dust which could impair operation.
SINAMICS SL150 6SL39616RC100AA02
Operating Instructions Rev.201910281458 EXAMPLE
2.3 kV to 36 kV, 3 ~ 50/60 Hz
Circuit-breaker control
4.2 Requirements when mounting and installing the device
1
2
Preparations for use
1
2
41
Advertisement
Table of Contents
