Configure:btooth:ibsemissions:gate:auto Once; Configure:btooth:measurement - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Parameters:
<NoChannels>
Example:
Mode:
Manual operation:

CONFigure:BTOoth:IBSemissions:GATE:AUTO ONCE

This command adjusts the gate settings for the In–band Spurious Emissions automati-
cally.
Note:
This command is only available with active In–band Spurious Emissions measurement
(see
Example:
Mode:
Manual operation:
CONFigure:BTOoth:MEASurement <MeasType>
This command selects the current measurement according to the Bluetooth standard.
Operating Manual 1176.7610.02 ─ 02
1 to 78
*RST:
CONF:BTO:IBS:ACP 20
Selects 20 adjacent channel pairs.
BT
See "No. of ACP Chan (TX Spec ACLR, Spurious Emissions)"
on page 41
CONFigure:​ B TOoth:​ M EASurement​
CONF:BTO:IBS:GATE:AUTO ONCE
Adjusts the gate automatically once.
BT
See "Adjust Gate"
Remote Commands for Bluetooth Measurements (K8)
CONFigure:BTOoth Subsystem (BLUETOOTH, K8)
78
on page 96).
on page 47
96