Measurement Types And Result Display - R&S FSV-K8 Operating Manual

®
R&S FSV-K8

3.1 Measurement Types and Result Display

The Bluetooth Measurements option provides various measurement types. The meas-
urements and the corresponding result display are described in the following chapters.
Generally, a diagram and a table with the main results are displayed.
For each measurement, the results are compared to the selected standard. If the
results match the standard, the status is indicated as "Passed". If one of the results
does not match the standard, that value is displayed in red, and the status of the mea-
surement is indicated as "Failed".
3.1.1 Output Power Measurement......................................................................................... 22
3.1.2 Adjacent Channel Power Measurement........................................................................24
3.1.3 Modulation Characteristics Measurement.....................................................................25
3.1.4 Initial Carrier Frequency Tolerance Measurement........................................................26
3.1.5 Carrier Frequency Drift Measurement...........................................................................27
3.1.6 Relative Transmit Power (EDR) Measurement............................................................. 28
3.1.7 In–band Spurious Emissions (EDR) measurement.......................................................29
3.1.8 Carrier Frequency Stability and Modulation Accuracy (EDR) measurement................ 31
3.1.9 Differential Phase Encoding (EDR) measurement........................................................32
3.1.1 Output Power Measurement
The Output Power measurement
average output power during a burst of the equipment under test (EUT). For this pur-
pose a complete packet is recorded in the time domain.
Operating Manual 1176.7610.02 ─ 02
Instrument Functions for Bluetooth Measurements (K8)
Measurement Types and Result Display
(Output Power softkey) determines the maximum and
22