Calculate<N>:Btooth:ibsemissions:hadjacent; Calculate<N>:Btooth:ibsemissions:txreference - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Manual operation:
CALCulate<n>:BTOoth:IBSemissions:HADJacent? <Band>
This command reads the maximum power of the upper or lower frequency band (500
kHz) of the TX channel in the In–band Spurious Emissions measurement.
Note:
This command is only available with active In–band Spurious Emissions measurement
(see
ments this command causes a query error.
Suffix:
<n>
Parameters:
<Band<
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:BTOoth:IBSemissions:TXReference?
This command reads the TX channel reference power.
Note:
This command is only available with active In–band Spurious Emissions measurement
(see
ments this command causes a query error.
Suffix:
<n>
Operating Manual 1176.7610.02 ─ 02
See "Spurious Emissions"
CONFigure:​ B TOoth:​ M EASurement​
.
irrelevant
UPPer | LOWer
*RST:
For the first steps refer to
ple", on page 127
CONF:BTO:MEAS IBS
Activates the In–band Spurious Emissions measurement.
CONF:BTO:CHAN 7
Adjust the TX channel number.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:IBS:HADJ? LOW
Reads the maximum power of the lower frequency band.
Query only
BT
See "Spurious Emissions"
CONFigure:​ B TOoth:​ M EASurement​
.
irrelevant
Remote Commands for Bluetooth Measurements (K8)
on page 46
on page 96). With all other measure-
-
chapter 4.14, "Programming Exam-
on page 46
on page 96). With all other measure-
CALCulate subsystem
78