Calculate<N>:Btooth:cfstability:devm:dpct; Calculate<N>:Btooth:cfstability:devm:d99Pct; Calculate<N>:Btooth:cfstability:devm:peak - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:BTOoth:CFSTability:DEVM:DPCT
CALCulate<n>:BTOoth:CFSTability:DEVM:D99Pct?
This command reads 99% of the differential error vector magnitude (DEVM) in the Car-
rier Frequency Stability and Modulation Accuracy measurement.
Note:
This command is only available with active Carrier Frequency Stability and Modulation
Accuracy measurement (see
With all other measurements this command causes a query error.
Suffix:
<n>
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:BTOoth:CFSTability:DEVM:PEAK?
This command reads the peak of the differential error vector magnitude (DEVM) in the
Carrier Frequency Stability and Modulation Accuracy measurement.
Note:
Operating Manual 1176.7610.02 ─ 02
Remote Commands for Bluetooth Measurements (K8)
For the first steps refer to
ple", on page 127
CONF:BTO:MEAS CFST
Activates the Carrier Frequency Stability and Modulation Accu-
racy measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:CFST:DEVM? AVER
Reads the root mean square of the average differential error
vector magnitude.
Query only
BT
See "Carr Freq Stability"
CONFigure:​ B TOoth:​ M EASurement​
.
irrelevant
For the first steps refer to
ple", on page 127
CONF:BTO:MEAS CFST
Activates the Carrier Frequency Stability and Modulation Accu-
racy measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:CFST:DEVM:D99Pct?
Reads 99% of the differential error vector magnitude.
Query only
BT
See "Carr Freq Stability"
CALCulate subsystem
chapter 4.14, "Programming Exam-
on page 47
on page 96).
chapter 4.14, "Programming Exam-
on page 47
72