R&S FSV-K8 Operating Manual page 107

®
R&S FSV-K8
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel <ReferenceLevel>
This command defines the reference level.
With the reference level offset ≠ 0, the value range of the reference level is modified by
the offset.
Suffix:
<n>
<t>
Parameters:
<ReferenceLevel>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet <Value>
This command defines a reference level offset.
Suffix:
<n>
<t>
Parameters:
<Value>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition <Position>
This command defines the position of the reference level on the display grid..
When using a tracking generator (only with option R&S FSV-B9 or -B10, requires
active normalization), and in Bluetooth mode (option R&S FSV-K8) this command
defines the position of the reference value for all windows.
Suffix:
<n>
<t>
Operating Manual 1176.7610.02 ─ 02
Remote Commands for Bluetooth Measurements (K8)
.
irrelevant.
irrelevant
The unit is variable.
Range: see datasheet
*RST: -10dBm
DISP:TRAC:Y:RLEV -60dBm
See "Ref Level" on page 49
.
irrelevant.
irrelevant
Range: -200 to 200
*RST: 0
Default unit: dB
DISP:TRAC:Y:RLEV:OFFS -10dB
See "Ref Level Offset"
.
Selects the measurement window.
irrelevant
DISPlay Subsystem (BLUETOOTH, K8)
on page 52
107