Calculate<N>:Btooth:aclr:exceptions - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Return values:
<Result>
Example:
Usage:
Mode:
Manual operation:
CALCulate<n>:BTOoth:ACLR:EXCeptions?
This command determines the number of exceptions which occurred during the adja-
cent channel power measurement according to the Bluetooth specification.
Note:
This command is only available with active Adjacent Channel Power measurement
(see
ments this command causes a query error.
Suffix:
<n>
Example:
Usage:
Mode:
Operating Manual 1176.7610.02 ─ 02
<TX channel – n>...<TX channel – 1> <TX channel> <TX chan-
nel + 1>...<TX channel + n>
The results are returned as a list of power values.
The number of adjacent channels is limited by the Bluetooth
band limits.
INST:SEL BTO
Activates the Bluetooth Measurements option.
INIT:CONT OFF
Selects single sweep operation.
CONF:BTO:MEAS ACLR
Activates the Adjacent Channel Power measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:ACLR?
Queries the power list.
Query only
BT
See "TX Spec ACLR"
CONFigure:​ B TOoth:​ M EASurement​
.
irrelevant
INST:SEL BTO
Activates the Bluetooth Measurements option.
INIT:CONT OFF
Selects single sweep operation.
CONF:BTO:MEAS ACLR
Activates the Adjacent Channel Power measurement.
INIT;*WAI
Starts the measurement with synchronization.
CALC:BTO:ACLR?
Queries the power list.
CALC:BTO:ACLR:EXC?
Queries the number of exceptions.
Query only
BT
Remote Commands for Bluetooth Measurements (K8)
on page 40
on page 96). With all other measure-
CALCulate subsystem
69