®
R&S
FSV-K8
2 Introduction to Bluetooth Measurements
(K8)
Overview of Firmware Option R&S FSV-K8
This section contains all information required for operation of an R&S FSV equipped
with Application Firmware R&S FSV-K8. It covers operation via menus and the remote
control commands for bluetooth measurements.
This part of the documentation consists of the following chapters:
●
chapter 2, "Introduction to Bluetooth Measurements
Introduces the Bluetooth option and provides further information.
●
chapter 3, "Instrument Functions for Bluetooth Measurements
Shows all softkeys available in the "Bluetooth" menu. This chapter also presents
the remote control commands associated with each softkey function.
●
chapter 4, "Remote Commands for Bluetooth Measurements
Describes all remote control commands defined for bluetooth measurements.
This part of the documentation includes only functions of the Application Firmware
R&S FSV-K8. For all other descriptions, refer to the description of the base unit.
2.1
Bluetooth Overview.................................................................................................... 10
2.2
Supported Tests..........................................................................................................12
2.3
2.4
2.5
Bandwidths..................................................................................................................15
2.6
2.7
Oversampling ............................................................................................................. 16
2.8
2.9
Trigger Concepts ....................................................................................................... 19
2.1 Bluetooth Overview
This section provides the following general information on Bluetooth measurements:
●
Bluetooth technical parameters
●
Power classes
●
Structure of a Bluetooth data packet
Operating Manual 1176.7610.02 ─ 02
Introduction to Bluetooth Measurements (K8)
(K8)", on page 10
Bluetooth Overview
(K8)", on page 20
(K8)", on page 67
10