Programming Example - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Parameters:
<Source>
Example:
Manual operation:

4.14 Programming Example

Adapting the settings to the characteristics of the DUT
INST:SEL BTO
Activates the Bluetooth Measurements option
INIT:CONT OFF
Selects single sweep operation
CONF:BTO:CHAN 10
Selects channel 10
CONF:BTO:PCL 1
Operating Manual 1176.7610.02 ─ 02
Remote Commands for Bluetooth Measurements (K8)
IMMediate
Free Run
EXTern
External trigger
IFPower
Power trigger at the second intermediate frequency
RFPower
Power trigger at the first intermediate frequency
VIDeo
Video mode is only available in the time domain and only in
Spectrum mode.
BBPower
Baseband power (for digital input via the R&S Digital I/Q Inter-
face, R&S FSV-B17)
PSEN
External power sensor (requires R&S FSV-K9 option)
*RST: IMMediate
TRIG:SOUR EXT
Selects the external trigger input as source of the trigger signal
See "Trg/Gate Source"
See "Free Run" on page 60
See "External" on page 60
See "Video" on page 60
See "RF Power" on page 60
See "IF Power/BB Power"
See "Power Sensor" on page 61
See "Time" on page 62
See "Digital IQ" on page 62
Programming Example
on page 60
on page 61
127