R&S FSV-K8 Operating Manual page 106

®
R&S FSV-K8
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:MODE <Mode>
This command selects the type of scaling of the y-axis.
When
effect on the screen.
Suffix:
<n>
<t>
Parameters:
<Mode>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:PDIVision <Value>
This remote command determines the grid spacing on the Y axis for all diagrams,
where possible.
Suffix:
<n>
<t>
Parameters:
<Value>
Example:
Mode:
Operating Manual 1176.7610.02 ─ 02
Remote Commands for Bluetooth Measurements (K8)
See "Range Log Manual"
See "Range Log 100 dB"
See "Range Log 50 dB"
See "Range Log 10 dB"
See "Range Log 5 dB"
See "Range Log 1 dB"
SYSTem:​ D ISPlay:​ U PDate​
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
irrelevant
ABSolute
absolute scaling of the y-axis
RELative
relative scaling of the y-axis
*RST:
DISP:TRAC:Y:MODE REL
See "Grid Abs/Rel "
.
irrelevant
irrelevant
numeric value; the unit depends on the result display
*RST:
DISP:TRAC:Y:PDIV 10
Sets the grid spacing to 10 units (for example 10 dB in the Code
Domain Power result display).
CDMA, BT, EVDO, TDS, WCDMA
DISPlay Subsystem (BLUETOOTH, K8)
on page 49
on page 50
on page 50
on page 50
on page 50
on page 51
is turned off, this command has no immediate
ABS
on page 53
depends on the result display
106