R&S FSV-K8 Operating Manual page 28

®
R&S FSV-K8
With "Clear/Write" trace mode and single sweep operation the selected number of
sweeps is processed and, according to the RF Test Specification, the results of all
sweeps are compared with the defined tolerance. If a different trace mode is selected,
alternatively, the analyzer cancombine several traces and determine the measurement
results from the resulting trace.
Fig. 3-6: Carrier Frequency Drift measurement
Result Summary
The results of the measurement are summarized in a table beneath the diagram. The
summary contains the following results:
●
Packet type
●
Packet length in symbols
●
Maximum frequency drfit per packet
● Maximum drift rate per 50 μs interval
3.1.6 Relative Transmit Power (EDR) Measurement
The measurement of the Relative Transmit Power
enhanced data rate measurement (EDR). It determines the average transmission
Operating Manual 1176.7610.02 ─ 02
Instrument Functions for Bluetooth Measurements (K8)
Measurement Types and Result Display
(Rel TX Power softkey) is an
28