R&S FSV-K8 Operating Manual page 89

®
R&S FSV-K8
Parameter, measuring function or result display
CARRIER FREQUENCY STABILITY (R&S FSV–K8)
DIFF PHASE ENCODING (R&S FSV–K8)
Suffix:
<n>
<m>
Example:
Usage:
4.1.3 CALCulate:MARKer Subsystem (BLUETOOTH, K8)
CALCulate<n>:MARKer<m>:PEXCursion
CALCulate<n>:MARKer<m>:Y?
CALCulate<n>:MARKer<m>:PEXCursion <Excursion>
This command defines the peak excursion
The peak excursion sets the requirements for a peak to be detected during a peak
search.
The unit depends on the selected operating mode and measurement.
Mode/Display mode
Spectrum
ADEMOD, RF display
ADEMOD, AM display
ADEMOD, FM display
ADEMOD, PM display
Suffix:
<n>
<m>
Operating Manual 1176.7610.02 ─ 02
Remote Commands for Bluetooth Measurements (K8)
.
Selects the measurement window.
Selects the marker.
INIT:CONT OFF
Switches to single sweep mode.
INIT;*WAI
Starts a sweep and waits for its end.
CALC:DELT2 ON
Switches on delta marker 2.
CALC:DELT2:Y?
Outputs measurement value of delta marker 2.
Query only
...........................................................................89
.........................................................................................90
Unit
dB
dB
PCT
kHz
RAD
.
Selects the measurement window.
irrelevant
CALCulate subsystem
Output unit
–
–
89