®
R&S
FSV-K8
Phase......................................................................................................................48
Standard
Opens a dialog box to select the standard by which the Bluetooth meaurements are
performed.
Currently, the following standards are supported:
●
Bluetooth 2.1 - Base Rate
●
Bluetooth 2.1 - EDR
Depending on the selected standard, different measurement types are available via
softkeys.
Output Power
Opens a submenu to configure the Output Power measurement. For further details
refer to
Remote command:
CONF:BTO:MEAS OPOW, see
CALCulate<n>: B TOoth: O POWer[: P EAK]?
CALCulate<n>: B TOoth: O POWer: A VERage?
Operating Manual 1176.7610.02 ─ 02
Instrument Functions for Bluetooth Measurements (K8)
└ Channel...........................................................................................................43
└
Setup.....................................................................................................44
└
Find
Sync........................................................................................................ 44
└
Power................................................................................................................ 44
└ Channel...........................................................................................................44
└
Meas
Setup.....................................................................................................44
└
Sync........................................................................................................ 45
└ Settings........................................................................................................... 45
└
Start........................................................................................... 45
└
Stop............................................................................................45
└
Start........................................................................................... 45
└
Stop............................................................................................45
Emissions.......................................................................................................46
└ Channel...........................................................................................................46
└
Setup.....................................................................................................46
└
Sync........................................................................................................ 46
└
└
└
└
Gate..................................................................................................... 47
Stability......................................................................................................... 47
└ Channel...........................................................................................................47
└
Setup.....................................................................................................48
└
Sync........................................................................................................ 48
└
└ Channel...........................................................................................................48
└
Meas
Setup.....................................................................................................48
└
Find
Sync........................................................................................................ 48
chapter 3.1.1, "Output Power
Emissions)................................................................... 47
Emissions)................................................................. 47
Stability).................................................................... 48
Measurement", on page 22.
CONFigure: B TOoth: M EASurement
on page 83
on page 83
Softkeys of the Bluetooth Menu
Drift)...........................44
on page 96
35