Find; Settings; Gfsk Start; Gfsk Stop - R&S FSV-K8 Operating Manual

®
R&S FSV-K8
Find Sync ← Rel TX Power
Opens a dialog box to set the signal processing functions of the analyzer, see
Sync"
Settings ← Rel TX Power
Opens a dialog box to define the start and stop times for power measurements.
GFSK Start ← Settings ← Rel TX Power
Defines the start time for the power measurement of the GFSK sections of the packet.
The default value is 10%.
The abbreviation GFSK stands for "Gaussian Frequency Shift Keying".
Remote command:
CONFigure:​ B TOoth:​ R TPower:​ G AVerage:​ S TARt​
GFSK Stop ← Settings ← Rel TX Power
Defines the stop time for the power measurement of the GFSK sections of the packet.
The default value is 90%.
The abbreviation GFSK stands for "Gaussian Frequency Shift Keying".
Remote command:
CONFigure:​ B TOoth:​ R TPower:​ G AVerage:​ S TOP​
DPSK Start ← Settings ← Rel TX Power
Defines the start time for the power measurement of the DPSK sections of the packet.
The default value is 10%.
The abbreviation DPSK stands for "Differential Phase Shift Keying".
Remote command:
CONFigure:​ B TOoth:​ R TPower:​ D AVerage:​ S TARt​
DPSK Stop ← Settings ← Rel TX Power
Defines the stop time for the power measurement of the DPSK sections of the packet.
The default value is 90%.
Operating Manual 1176.7610.02 ─ 02
Instrument Functions for Bluetooth Measurements (K8)
on page 37.
Softkeys of the Bluetooth Menu
on page 101
on page 101
on page 100

"Find

45