Table of Contents
Advertisement
Instrument Info
Displays a window with the following information:
Analyzer model and rmware revision
BootROM version
Analyzer serial number
Installed options
System impedance
Installed memory
Update orr onst Menu
For a complete description of when and how to use these keys, refer to\Storing and Recalling
Correction Constants" in Chapter 8. he following is a brief description.
Install CC From Disk
EPROM. his key combines the functions of
: Displays a banner which describes the keys of this menu.
Help Menu
Load CC From Disk
oppy disk drive into RAM. You cannot select an alternate disk drive. It allows you to copy a
partially modi ed set of data into RAM and then continue with the rest of the adjustments.
: At power-up, correction constants are copied from the
ash EPROM to a
tore CC To Disk
RAM bu er. Any changes to the correction constants are made to the bu er only. Pressing this
key creates a disk le that contains the correction constants from the bu er. his le is always
written to the internal disk drive, regardless of the disk drive selected using the save/recall
functions. he le will write over any existing le with the same name.
tore CC To EPROM
contained in RAM to permanent storage in the EPROM.
5-6
Serv ce Related Menus
: Loads permanent copy of correction constant data from disk to
: his copies the contents of the correction constant le from the internal
: his will copy the current contents of the analyzer's CCs data that is
Load CC from Disk
and
tore CC to EPROM
.
Advertisement
Table of Contents
