Table of Contents
Advertisement
1
Getting Started
Inspection and Maintenance
Initial inspection
When you receive your U2722A/U2723A, inspect the unit for any obvious
damage such as broken terminals or cracks, dents, and scratches on the
casing that may occur during shipment. If any damage is found, notify the
nearest Agilent Sales Office immediately. The front of this manual contains
the warranty information.
Keep the original packaging in case the U2722A/U2723A has to be
returned to Agilent in the future. If you return the U2722A/U2723A for
service, attach a tag identifying the owner and model number. Also
include a brief description of the problem.
Electrical check
The U2722A/U2723A USB Modular Source Measure Units Service Guide will
provide the complete verification procedure. The procedure will verify to a
high level of confidence that the U2722A/U2723A is operating according to
its specifications.
Ventilation
The U2722A/U2723A can operate within the temperature range of 0° C to
50° C. A fan cools the U2722A/U2723A by drawing and exhausting air
through the sides (and rear
Your U2722A/U2723A must be installed in a location that allows sufficient
space at the sides (and rear
circulation.
For the use of your U2722A/U2723A in the U2781A instrument chassis, it
comes with two cooling fans that help to improve the air circulation.
[1] The U2723A USB Modular Source Measure Unit comes with two cooling fans, one located at the
10
side, the other located at the rear.
[1]
).
[1]
) of the U2722A/U2723A for adequate air
U2722A/U2723A User's Guide
Advertisement
Table of Contents
