Initial Registration Of E5061A/E5062A - Agilent Technologies ENA Series Service Manual

System Recovery

Initial Registration of E5061A/E5062A

Initial Registration of E5061A/E5062A
When you start up the E5061A/E5062A for the first time or after executing system
recovery, you need to perform the initial registration of the Windows 2000 operating
system of the E5061A/E5062A.
NOTE
You cannot use the front panel keys during the initial registration of the E5061A/E5062A
therefore connect the mouse and the keyboard before turning on the power.
NOTE
If you perform the following procedure incorrectly, a message asking you whether to return
to the previous registration screen and perform the registration appears. In this case, follow
the instruction to return to the previous registration screen.
Step 1. Turns on the E5061A/E5062A.
Step 2. The Windows 2000 Professional Setup wizard appears. Click the
B-1).
Figure B-1 Windows 2000 Professional Setup wizard
214
button (Figure
Next >
Appendix B