Revisions - Mitsubishi Electric MELSEC iQ-FX5 User Manual

REVISIONS

*The manual number is given on the bottom left of the back cover.
Revision date *Manual number
November 2014 IB(NA)-0300253-A
January 2015 IB(NA)-0300253-B
August 2015 IB(NA)-0300253-C
October 2016 IB(NA)-0300253-D
Japanese manual number: IB-0300252-C
This manual confers no industrial property rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held
responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.
2014 MITSUBISHI ELECTRIC CORPORATION
644
Description
First edition
Added or modified parts
SAFETY PRECAUTIONS, RELEVANT MANUALS, TERMS, Section 2.1, 3.1, 3.2, 4.1, 5.1, 5.2, 5.3, 5.4,
6.2, 7.4, 7.5, 7.9, 8.9, 10.1, 10.2, 10.3, 10.7, 10.8, 10.9, 12.1
Added functions
Command generation axis
Added or modified parts
Section 1.1, 1.2, 2.1, 3.1, 3.2, 4.1, 4.3, 4.4, 4.5, 5.1, 5.4, 6.1, 7.4, 7.5, 7.6, 7.9, 7.10, 8.1, 8.2, 8.3, 8.4,
8.5, 8.8, 8.9, 8.10, 8.11, 10.1, 10.2, 10.3, 10.4, 10.7, 10.8, 10.9, 11.2, 11.4, 12.1, 12.3, 12.4, 12.5,
Appendix 2, 3
Added models
FX5-80SSC-S
Added functions
Linear servo motor control mode/Direct drive motor control mode/Fully closed loop control mode,
Inverter FR-A800 series, Stepping motor driver AlphaStep/5-phase manufactured by ORIENTAL
MOTOR Co., Ltd., Servo driver VC series/VPH series manufactured by Nikki Denso Co., Ltd., IAI
electric actuator controller manufactured by IAI Corporation
Added or modified parts
SAFETY PRECAUTIONS, INTRODUCTION, TERMS, Section 1.1, Section 2.1, 2.2, 2.3, 2.4, 3.1, 3.2,
4.1, 4.3, 4.4, 4.5, 5.2, 5.3, 5.4, 6.1, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.7, 7.8, 7.9, 7.10, 8.1, 8.2, 8.3, 8.4, 8.5,
8.6, 8.7, 8.8, 8.9, 8.10, 8.11, 8.12, 9.1, 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7, 10.8, 10.9, 11.1, 11.2,
11.3, 11.4, 12.1, 12.3, 12.4, 12.5, Appendix 2, 3, WARRANTY