Mitsubishi Electric MELSEC iQ-FX5 User Manual page 239

Setting method from the CPU module
The following shows the data settings and program example for changing the control speed of axis 1 by the command from
the CPU module. (In this example, the control speed is changed to "20.00 mm/min".)
• Set the following data.
(Set using the program referring to the speed change time chart.)
n: Axis No. - 1
Setting item
[Cd.14] New speed value
[Cd.15] Speed change request
Refer to the following for the setting details.
Page 470 Control Data
• The following shows the speed change time chart.
■Operation example
V
[Cd.184] Positioning start signal
[Cd.190] PLC READY signal
[Cd.191] All axis servo ON signal
READY signal
([Md.140] Module status: b0)
Start complete signal
([Md.31] Status: b14)
[Md.141] BUSY signal
Positioning complete signal
([Md.31] Status: b15)
Error detection signal
([Md.31] Status: b13)
[Md.40] In speed change
processing flag
[Cd.14] New speed value
[Cd.15] Speed change request
Program example
Refer to the following for the program example of the speed change program.
Page 535 Speed change program
Setting value Setting details
2000 Set the new speed.
1 Set "1: Change the speed".
0
1
0
1
Buffer memory address
4314+100n
4315+100n
4316+100n
Dwell time
0
2000
0
7 CONTROL SUB FUNCTIONS
7.5 Functions to Change the Control Details
t
7
237