Table of Contents
Advertisement
Stratasys J3 Series User Guide
Pattern Test
The pattern test is the basic verification of the printer's ability to produce quality
models, since it demonstrates the condition of the nozzles in the print heads.
Make sure, therefore, that you perform this test weekly, and whenever you
suspect a printing problem.
To perform the pattern test:
1. Prepare—
2. Make sure that the build tray is empty.
3. From the Wizards screen, select Pattern Test.
4. In the opening wizard screen, tap Start to begin.
DOC-19001 Rev. G
❒ the Missing Nozzles ruler
❒ a sheet of pink paper (A-4 or Letter size)
4 Operating and Maintaining the Printer
4-39
Advertisement
Table of Contents
