Stratasys J3 Series User Guide
Grounded Chassis
If the printer is not used as specified in this guide, these safety features may not
provide adequate protection.
Symbols and Warning Labels
The following table lists the warning labels located on or in the printer.
Warning Symbol
DOC-19001 Rev. G
The chassis of the printer is grounded, to prevent electrical
shock.
Note: The power outlet must be grounded in accordance with
the local electric code to provide this protection.
Meaning
Location
Hazard (general)
On the name plate on
the back of the printer.
Hot surface
On the print block.
Ultraviolet radiation Near the UV lamps.
On the UV module.
Sharp object
Inside the materials
cabinet.
2 Safety
Comments
Read the instructions in
this document before
operating the printer.
Risk of burns. Do not
touch this surface after
printing.
Risk group 3 UV emitted
from this product. Avoid
eye and skin exposure to
unshielded product.
Risk of injury from the
needle in the cartridge
slots.
2-3