Safety Features - Stratasys J3 Series User Manual

Stratasys J3 Series User Guide

Safety Features

Interlock Switch
Safety Lock
UV Screening
DOC-19001 Rev. G
Stratasys 3D printers are designed to comply with CE and FCC
standards. They are equipped with the following safety features:
The power supplied to the UV light is turned off when the door is
opened.
Warning
Do not defeat (override) the interlock switch. Doing so could
result in serious personal injury. If the interlock switch does not
function correctly, do not use the printer, and contact your
service provider.
The door is locked while the printer is working. If you do manage
to open it, the UV light and the motors turn off.
Warning
Do not defeat (override) the safety lock. Doing so could
result in serious personal injury. If the safety lock does not
function correctly, do not use the printer, and contact your
service provider.
The transparent sections of the door and sides block harmful UV
radiation, allowing the operator to view the 3D prints during the
printing process.
Figure 2-1 Front view of the printer
2 Safety
2-2