Stratasys J3 Series User Manual page 90

Stratasys J3 Series User Guide
19. Inside the printing chamber, attach the driver card to the installation tool
Important: To install the print head correctly, the contacts on the driver card
should face you as you attach it to the installation tool.
20. While holding the print head with one hand, pull the installation tool up until
DOC-19001 Rev. G
with the elastic band.
Figure 4-89 Inserting the print-head-driver installation tool
the driver card passes through the opening.
Keep the driver card attached to the installation tool.
Figure 4-90 Inserting the print-head-driver installation tool
4 Operating and Maintaining the Printer
4-62