Stratasys J3 Series User Manual page 105

Stratasys J3 Series User Guide
3. Click Settings (above) to open the Settings pane (below).
4. Click Browse Grid Image and Browse Pattern Image to import these
5. Click Send calibration file to printer.
DOC-19001 Rev. G
Figure 4-116 Settings pane
files.
GrabCAD Print calculates the head/software calibration parameters and
saves them in a file on your computer.
Figure 4-117 Sending calibration parameters to the printer software.
Note: GrabCAD Print can send the calibration file to the printer only if the
computer has a connection to it. If you need to manually transfer the
calibration file to the printer computer, continue with "Transferring the
Calibration File Manually" on page 4-79.
4 Operating and Maintaining the Printer
4-77