Table of Contents
Advertisement
Stratasys J3 Series User Guide
6. Absorb the solution from the acrylic surface with the cloth, without applying
7. If necessary, repeat to remove any remaining marks, or apply clean water
8. If the surface is still wet, you can dry it with a clean, micro-fiber cloth by
If convenient, you can apply the cleaning solution and water to the acrylic
surfaces with a spray bottle instead of with the cloth.
DOC-19001 Rev. G
pressure.
to rinse the surface.
gently wiping in one direction.
4 Operating and Maintaining the Printer
4-85
Advertisement
Table of Contents
