Table of Contents
Advertisement
Stratasys J3 Series User Guide
4. When instructed by the wizard, open the printer.
Warning: Hot Surface
The print head orifice plates (bottom surface) are hot. Do not touch them
with your bare hands, and proceed with caution.
5. Put on the gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
6. Soak the cleaning cloth with alcohol.
7. Clean the print heads gently, with a back-and-forth motion.
Recommendation: Fold the alcohol-soaked cleaning cloth twice. Then,
gently clean the heads four times, each time with another surface of the
cloth.
DOC-19001 Rev. G
The wizard displays the checklist of cleaning tasks.
Figure 4-44 Routine Cleaning tasks
Perform the cleaning tasks in the order shown.
Figure 4-45 Cleaning the print heads
4 Operating and Maintaining the Printer
4-35
Advertisement
Table of Contents
